NSWS Proven 99.6% effective Scale Prevention, Water Softener Alternative

AquaHouse NSWS Scale prevention system with proven 99.6% Effectiveness  – Chemical and Salt Free 

Scale prevention system for use in small/average homes. Proven scale prevention technology at 99.6% effectiveness makes this a genuine alternative to conventional water softeners. If you would also like to filter your water at the same time as preventing scale (to remove chlorine, chemicals, etc) then please search for our EcoPlus whole house filter which features both scale prevention and water filtration in one unit.

The scale prevention effect takes place within the filter without adding any salt or chemicals into the water. The filter does this by using a process called Template Assisted Crystallization (TAC), which conditions the water and converts the hardness minerals in the water (Calcium and Magnesium) into harmless, inactive microscopic crystals. This prevents the Calcium and Magnesium from bonding together to form lime-scale, and also over time will de-scale existing pipework and appliances. Because of this process no natural minerals are lost from the water, and no chemicals or salts are added either.

Water which has undergone this filtration process has an effect which prevents scale from forming in pipework and appliances, around sinks and washbasins, and will help prolong the life and efficiency of your appliances. The scale prevention media has been tested independently against the international protocol for scale prevention and has achieved up to 99.6% effectiveness rating.

You will need to replace this filter in the system just once every 2-3 years (depending upon incoming water quality)

 Template Assisted Crystallization compared to a water softener

• 99.6% efficiency independently verified by the German DVGW test for scale prevention. 
• The proven water softener alternative Fit and forget
• No moving parts to break or fail, doesn’t waste water in regeneration or backwash 
• Total boiler and appliance protection with no associated corrosion issues, clears existing scale deposits from pipes, fittings and appliances. 
• Unlike water softeners – no salt discharged into the environment 
• Unlike water softeners – no salt to buy or add which will save you time and money

How it works: 

In an untreated hard water supply, the hardness minerals such as calcium form calcium carbonate – rock hard deposits we know as lime-scale.	The polymeric template beads attract the mineral ions on a molecular level in a process known as Template Assisted Crystallisation (TAC).

The minerals collect within the nucleation points on each polymeric bead and form microcrystals.	After forming, the microcrystals break off from the template beads and continue through the water supply, as inert particles unable to form hard scale

Hardness minerals in water treated by the TAC process pass through pipework and appliances, without sticking to form hard lime-scale, beneficial to plumbing fittings and heating systems.	Where water evaporates, the water marks left behind consist of the mineral residue in crystalline form, and wipe away easily with general cleaning, not requiring aggressive descaling.

Installation

The system comes complete with new filter installed, pod, spanner, and mounting bracket. The system has 3/4″ BSP threaded nipples pre-installed, and is simply connected in-line with your cold water mains pipe to filter the water for the whole home / premises. This is a very straight forward installation for any plumber.

We also have a full bore compression fittings bypass kit and flexible hoses available as an optional extra, these are useful for tight installations where the system cannot be installed in-line with the pipe and needs to go underneath / above the pipe instead. Please see “accessories” tab for fitting kits in 15mm and 22mm sizes,

Approvals